Schroefaskeerringen
08 November 2021

Replacing propeller shaft seals

Last week we did a nice job in Germany. We replaced the propeller shaft seals for this ship. It concerned two Rolls Royce US381 CRP thrusters.

Img 0920 3
01 November 2021

Bow thruster leak

After our inspection in the dock, our engineers discovered a leak in the underwater housing of a Schottel STT170. Cavitation (formation and abrupt collapse of vapor-filled bubbles) had created a hole in the house. We have therefore disassembled the bow thruster and brought it to our workplace. The underwater housing has been replaced for a new Ni-Resist underwater housing. We sent the bow thruster back to the yard, so that they can install it and use it for many years to come.

Levering Vouwponton
01 October 2021

Delivery folding pontoon Sweden

Delivery folding pontoon Sweden. This concerns a delivery to a Swedish customer who uses the pontoon for various activities on the water. By linking different parts, a work platform is created that can be used multifunctionally.

Levering SRP1012CP
19 August 2021

Delivery SRP1012CP

Onderweg naar de klant. Twee stuks onderwaterhuizen van het type Schottel SRP1012CP. De onderwaterhuizen zijn hier in de werkplaats gereviseerd en worden ter plaatse op de scheepswerf weer in het schip ingebouwd.

Schottel Srp110 3
13 August 2021

Schottel SRP100/103

Ready for delivery to the customer. Four rudder propellers SRP100/103 bottom mounting. The thusters are delivered including coupling BMK80 and Schraven control. The whole is for the replacement of the current drive in an existing ferry, for the benefit of a Romanian customer.

Zodiac N Zo 760 2X 150Pk Suzuki 4
09 July 2021

Zodiac N-ZO 760

Delivered to a customer this week a Zodiac rib with 2 x 150 HP Suzuki outboard motor. For more boats see the boats section on the website.

Img 6778
24 June 2021

Exchange underwater housing SRP1012CP

Changing the underwater housings of a Schottel SRP1012CP. The underwater housings have been overhauled here in the workshop and are installed back into the ship under the supervision of one of our technicians on site in Poland. The disassembled houses have been sent to our workshop for complete overhaul.

Demonteren Jastram Rp07 1
21 June 2021

Exchange Jastram RP07

Recently assisted on location with the disassembly of a thruster on board our customer's ship. The ship has two Jastram RP07 rudder propellers. The thruster is disassembled in the workshop in order to subsequently make a cost calculation. After order from the customer, the thruster will be repaired and then placed back on board the ship.

1 2 3 4 5 6 7 8 9